Philips HQ7815 Mode D'emploi page 11

take several weeks before optimal shaving
performance is restored.
◗ Remove the hairs with the brush supplied.
◗ Put the shaving heads back into the shaving
unit, put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
B
◗ Open the shaving unit, turn the wheel
anticlockwise and remove the retaining frame.
◗ Remove the old shaving heads from the
shaving unit and replace them with new ones.
Damaged or worn shaving heads (cutters and
guards) must only be replaced with original Philips
HQ6 Quadra shaving heads.
◗ Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
2 The shaver does not work when the on/off
button is pressed.
Cause: the batteries are empty.
B
◗ Recharge the batteries. See chapter 'Charging'.
3 The shaving unit has become detached
from the shaver.
ENGLISH
13