Oreck SURFACESCRUB FK40100 Serie Manuel Du Propriétaire page 20

If appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, take it to a service center prior to
contunuing use. Any other servicing should be done by an authorized service representative.
Problem
Unit does not turn ON
Water/solution will not
dispense liquid
All manuals and user guides at all-guides.com
5. TROUBLESHOOTING
Resolution
• If there is no voltage in wall plug, check fuse or breaker in home.
• Replace fuse or reset breaker in home in the event that there is a
blown fuse, it has been tripped, or it is broken.
• Clean water tank may not be locked in position.
• Clean water tank may be empty and need to be reffi i fi fi fi l led.
• Mode selector switch is set to DRY mode, change to WASH.
• Check the SpinBrush 360
for blockages.
™