INFOSEC UPS SYSTEM E3 PRO Manuel Utilisateur page 9

UPS Status
Line Mode
Battery Mode
Low battery
Battery replacement
Fault
On/off status of output
receptacles
3-3. Audible Alarm
Battery Mode
Low Battery
Overload
Fault
Bypass Mode
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 17 AA 59 204 19
LED
LED1
LED4 to LED7 indicate load
level during line mode.
LED4: > 75% load level
LED5: 50% ~ 75% load level
LED6: 25% ~ 50% load level
LED7: 0% ~25% load level
LED2
LED4 to LED7 indicate battery
capacity during battery mode.
LED4: battery voltage > 26V
LED5: battery voltage > 24.5V
LED6: battery voltage > 23V
LED7: battery voltage > 21V
LED7
LED3
LED3
LED 8: indicating on/off status
of general output receptacles
()
LED 9: indicating on/off status
of programmable outlet ()
Sounding every 4 seconds
Sounding every second
Sounding twice every second
Continuously sounding
Sounding every 10 seconds
Color Lighting/Flashing
Green Lighting
Green Lighting
Yellow Flashing
Green Lighting
Green Flashing
Red Flashing
Red Lighting
Green Lighting
9