INFOSEC UPS SYSTEM E3 PRO Manuel Utilisateur page 8

3 . O P E R A T I O N S
3-1. Button operation
Button
ON/OFF Button
3-2. LED Indicators
L1 : normal mode (mains available)
L2 : battery mode (no mains)
L3 : default
L4 à L7 : connected load level / battery load level
L8 (L1) : status receptacle output outlet
L9 (L2) : status programmable output outlet
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
8
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 17 AA 59 204 19
Function
•
Turn on the UPS: Press and hold button for at least 2 seconds to
turn on the UPS.
•
Turn off the UPS: Press and hold this button at least 2 seconds to
turn off the UPS. UPS will be in standby mode when utility power
is normal or transfer to bypass mode if bypass mode is enabled
via software.
LED indicators On/Off button