Electrical Connections - CAME XVIA Manuel D'installation

ELECTRICAL CONNECTIONS

⚠ Before acting on the control board, cut off the main power supply.
 The 24 V DC output power is of the SELV type.
All connections are quick-fuse protected.
FUSE TABLE
-> Motor (A)
-> Electro-lock (A)
-> Accessories (A)
Description of parts
1. Function programming keys
2. DIP-switch for RS485 terminator
3. CRP connection terminals
4. LED indicator connection terminals
5. Rotation successful relay-output
6. Buzzer terminals
7. Arms rotation sensor terminals
8. Cover micro-switch connection terminals
9. Accessory connection terminal board
10. Encoder terminals
11. Motor terminals
12. Arm fall-away electro-lock terminals
13. Power supply to accessories terminal
14. Control board terminals
15. Accessories fuse
16. Electro-lock fuse
17. Motor fuse
18. Power on LED
19. Restart key
DIP1: set to ON if the cable connecting
to the remote control device is longer
than 30 m.
DIP2: leave on OFF.
TOR500
3 - F
2 - F
1 - F