Panasonic PV-27DF62-K Manuel D'utilisation page 26

All manuals and user guides at all-guides.com
Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some
basic DSS or Cable box functions.
The Universal Remote Control Setup
1
Find your DSS box or Cable box
Brand Code Number from one of the
charts on the next page.
2
Setup remote.
Hold down DSS CABLE and press
number keys to enter code.
• If code number is 100 or greater,
e.g., press 1 - 0 - 2 for 102.
3
Confirm code entry.
Press POWER to turn selected unit
ON or OFF.
• See below for controllable functions in each mode.
Notes
• Please repeat the Universal Remote Control Setup
after replacing remote control batteries.
• The remote control will not operate all DSS receivers
or Cable Boxes made by the manufacturers listed.
If you get no results, your particular brand cannot be
controlled.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up,
you can select FM/TV, DVD, DSS or CABLE mode
depending on which functions you wish to control.
Press FM/TV, DVD or DSS CABLE
remote control to select the desired mode. (See
below for buttons available in each mode.)
Set to FM/TV, DVD:
All TV, FM, and DVD functions.
Set to DSS CABLE:
• CABLE/DSS function, e.g. POWER, ENTER,
NUMBER keys (except 100 key), CH UP/DOWN.
26
27DF62-K(E) (P26-27 Univ rem).p65
on the
26
OPEN/CLOSE LIGHT
POWER
DSS
FM/TV
FM/TV D V D
CABLE
DVD
+
DSS
CABLE
ADD/DLT
NUMBER
AUDIO ANGLE SUB TITLE DISPLAY
keys
TITLE MENU
S E T
ENTER
ACTION RETURN
+
SKIP PLAY SKIP
PAUSE STOP ZOOM
SLOW/SEARCH
2002/04/15, 18:39