For Your Safety - Panasonic KX-MB2100 Serie Mode D'emploi

NOTES:
If you experience any problems with the normal use of
●
your apparatus, you should unplug it from the telephone
outlet and connect a known working telephone in its
place. If the known working telephone still gives
problems, then please contact the customer service
department of your PSTN operator (e.g. BT etc.). If it
operates properly, then the problems are likely to be a
fault in your apparatus. In this case, consult your
supplier for advice.
Your PSTN operator may charge you if they attend a
●
service call that is not due to apparatus supplied by
them.
1.9.1 Informations importantes

For your safety

This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
Should the fuse need to be replaced please ensure that
the replacement fuse is of the same rating and that it is
approved by ASTA or BSI to BS1362.
Check for ASTA mark
the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
How to replace the fuse: Open the fuse compartment with
a screwdriver and replace the fuse (and fuse cover).
FUSE
or the BSI mark on
OR
FUSE
11