Printer Parts - HP Photosmart Pro B8800 Série Guide De L'utilisateur

Printer parts

Front of printer
1 Control panel and indicator lights: Use the buttons on the control panel to open the Toolbox on the computer, resume or
cancel print jobs, and respond to prompts on the computer screen. View the lights to check the printer status. For more
information on the indicator lights, see
2 Top door: Lift to gain access to the printheads and to clear paper jams.
3 Specialty media tray (closed): Lower to insert a single sheet of heavy media, such as card stock or canvas. Use this tray
when you want media to be fed straight through the printer, without being bent. Do not load media thicker than 0.7 mm, or
more than one sheet at a time.
4 Main tray: Place a stack of plain paper or photo paper in this tray for printing.
5 Output tray: Print jobs come out here. For easier access to the main tray, you can remove the output tray by sliding it towards
you.
6 On button: Press to turn on the printer.
7 Ink cartridge door: Press the raised bumps on the surface of the door to open and insert or remove ink cartridges.
Back of printer
1 Rear door: Remove this door to clear paper jams.
2 Rear paper slot: Print jobs from the specialty media tray pass back and forth through this slot before being ejected on the
output tray at the front of the printer. Check that there is enough room behind the printer for the paper to pass back and forth
through the slot without any obstructions. When you are printing from the specialty media tray, the space behind the printer
should be equivalent to the length of paper you are printing on.
3 Power cord connection: Use this port to connect the power cord included with the printer.
Error states and indicator light behavior.
Printer parts 3