Unpacking And Assembling - Kalorik WFVC 46130 Mode D'emploi

UNPACKING AND ASSEMBLING

Step 1: Release the side latches and remove the main body (Fig. 1).
Step 2: Lift the filtration assembly and unpack the casters and
attachments from the barrel (Fig. 2).
Step 3: Insert the casters into the holes in the base, in a turning motion.
Then press down and make sure the casters are firmly attached (Fig. 3).
Step 4: Put down the filtration assembly (Fig. 4).
Step 5: Insert part 1 (on main body) into part 2 (of barrel). Then lock the
latches (Fig. 5).
www.KALORIK.com
WFVC 46130 - 200616
6