•
When using the pet brush, remove the floor brush and insert the pet
brush directly into the extension tube.
CLEANING AND MAINTENANCE
Step 1: To empty the dirty water from your vacuum cleaner, release the
latches and remove the main body and filtration assembly (Fig. 14).
Note: Make sure to remove the hose before releasing the latches.
Step 2: Pour the dirty water in a bucket or in the toilet (Fig. 15). Then,
rinse under clear water.
Step 3: Remove the sponges from the filtration assembly and rinse them
under clean water (Fig. 16).
www.KALORIK.com
10
WFVC 46130 - 200616