Kalorik WFVC 46130 Mode D'emploi page 11

To clean the cyclone generator: Remove the cyclone generator from
the filtration assembly and rinse under clear water (Fig. 17).
To clean the filter: Remove the filter from the main body and rinse under
clear water. Let the filter air dry before putting back into place (Fig. 18).
Notes:
• Do not wash the filter in the dishwasher or in the washing machine.
Do not use a hair dryer to dry the filter.
• Always make sure the filter is in place before operating the
appliance. Never use without the filter.
• The filter should be cleaned twice a year. If visibly dirty, clean it at
once. Replace the filter if damaged.
• To replace the filters, please follow instructions provided in the
separate installation guide.
STORAGE: Wrap the power cord around the main body. Insert the hook
of the adjustable tube into the side of the main body. Then, insert the
dust brush and crevice tool into the base (Fig. 19).
TROUBLESHOOTING
ISSUE
The vacuum
cleaner
won't run.
www.KALORIK.com
POSSIBLE REASON
1. Switch button is not
on.
2. Power cord is not
firmly plugged into
the outlet.
POSSIBLE SOLUTION
1. Turn the switch button
On.
2. Check that the plug is
inserted firmly into the
electrical outlet.
3. Allow cleaner to cool.
11
WFVC 46130 - 200616