Installation - modbar New Steam System Mode D'emploi

BOILER
MODEL/SERIES
GROUP
AC220-240V/50-60Hz
MODBAR
1GR / 2GR
AC208/60Hz
NEW STEAM
POWER CORD:
1 X BLUE (NEUTRAL)
3 X WIRES
220V
1 X BROWN (PHASE)
1 X YELLOW & GREEN (GROUND)
WARNING
In order to prevent cracks
or leakage: do not store or
install the Steam machine
in places where in boiler or
hydraulicsystem to freeze.
RATED
RATED
V/Hz POWER INPUT
(A)
(W)
3306 14,4
2704 13
WARNING
THE DETAILS ON THE LEFT DESCRIBE
HOW TO CONNECT EACH WIRE TO THE PLUG.
RESPECT ALSO THE LOCAL SAFETY
WARNING
For the connection of the
machine, it must be provided a
suitable disconnection device
near the installation, so that
in case of trip, it is possible to
operate the device near the
machine.
POWER CORD
SIZE (mm²)
For cutting the counter refer to
SEE ELECTRICAL
cutting template placed inside
CONNECTIONS
FOR DETAILS
Replace fuses with the same size,
type and rating. e.g. F1 = 2A, 250V
REGULATIONS.
permanently connected to fixed
wiring, and it is mandatory that
a residual current device (RCD)
with a rated residual operating
current not exceeding 30mA is

3. Installation

WARNING
Installation on the counter:
the package.
WARNING
WARNING
This machine should not be
installed in kitchens.
WARNING
The machine is intended to be
installed.
11