Samsung HT-E6730W Mode D'emploi page 17

Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the
color coded plug on each bundle to the colored sticker on the bottom of
each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire,
and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of
the speaker jacks.
4. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
• The TX card enables communication between the product and the
wireless receiver module.
5. Connect the left and right surround speakers to the wireless receiver
module. Again, match the color of the plugs to the jacks on the
wireless receiver module.
6. Plug the power cord of the wireless receiver module into a wall outlet.
7. Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the Surround speakers.
Surround
Speaker (L)
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
HT-E6730W_ZC_0314.indd 17 HT-E6730W_ZC_0314.indd 17
All manuals and user guides at all-guides.com
Center Speaker
Subwoofer
Surround
Speaker (R)
Black
LAN
TX card
SPEAKERS OUT
CENTER FRONT FRONT TOP
SUBWOOFER FRONT FRONT TOP
SPEAKER IMPEDANCE : 3
Front/Front Top
Speaker (R)
SPEAKERS OUT
CENTER FRONT FRONT TOP
SUBWOOFER FRONT FRONT TOP
SPEAKER IMPEDANCE : 3
iPod LAN WIRELESS
Red
HDMI OUT
WIRELESS
Front/Front Top
Speaker (L)
17
|
English
2012-03-14 오후 3:48:12 2012-03-14 오후 3:48:12