Panasonic CQ-C8803U Manuel D'instructions page 37

Problem
Some operations are not executable in particular modes such as menu mode.
Some operations
a
are not executable.
BALANCE/FADER setting is not appropriate.
a
No sound from
There is a break, a short circuit, poor contact or wrong wiring regarding the speaker
speaker(s)
wiring.
a
The speaker
channels are
The speaker wiring is confused between right and left.
reversed between
a
right and left.
The sound field is
not clear in the
The plus and minus terminals at right and left channels of speakers are connected
stereo mode.
reversely.
Central sound does a
not settled.
The power fails
The safety device works.
unintentionally.
a
Antenna installation or wiring of antenna cable is faulty.
a
Poor reception or
noise
No power is supplied to the antenna amplifier (when using a film antenna, etc.).
a
The number of auto
The number of receivable stations is less than 6.
preset stations is
a
less than 6.
The contact of the battery lead is poor, or the battery lead is not always powered.
Preset stations
a
cannot be stored.
Possible cause
Read the operating instructions carefully and cancel the mode. If the unit is
still out of order, consult your dealer.
Readjust BALANCE/FADER.
Check the speaker wiring.
Perform the speaker wiring in accordance with the wiring diagram.
Perform the speaker wiring in accordance with the wiring diagram.
Consult your dealer, or your nearest Panasonic Servicenter.
Check whether the antenna mounting position and its wiring are correct. In
addition, check to see whether the antenna ground is securely connected to
the chassis.
Check the wiring of the antenna battery lead.
Move to an area where receivable stations number is maximum, and try pre-
setting.
Make sure that the battery lead is connected securely, and preset stations
again.
Possible solution
a
CQ-C8803U
37