Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Radio
Band
Preset Number
Lights while receiving an FM stereo signal.
Lights when MONO is activated.
In the AM mode, only AUDIO FILTER and LOCAL can be
selected.
1
Press [MENU] to
display the menu
display.
For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
22
CQ-C8803U
(a
}
{
] or [
] to select a mode to be
page 22)
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity
radio wave station (default)
: Searching only for a high-intensity radio wave
station
AUDIO FILTER
IF filter setting for noise suppression
: Wide range
: Middle range (default)
: Narrow range
PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for preset-
ting stations in different areas in different bands.
(default)
Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations.
Frequency
Lights when LOCAL is
activated.
(a
page 22)
:
:
Publicité
Table des Matières
