Stopping The Device; Error Messages; Advanced Functions; Main Menu - Tractel dynafor LLX1 Série Instructions D'emploi

6.2.4.7 Stopping the device

Display
11

6.2.5 Error Messages

No radio reception
12

6.3 Advanced functions

This chapter presents the functions allowing advanced use of the LLX1 display unit.
"NOTE"

6.3.1 MAIN Menu

13
Action
No action
ESC
No action
Select an icon and enable the
available options
Select an icon and enable the
available options
Possible causes
Sensor off.
Sensor too far from display unit.
Network conflict.
High electrical magnetic interference.
Certain functions are visible, but not accessible, on the LLX1
display unit. These functions are specific to the LLX2 system
display units.
Confirm selection
Return to standard display
ESC
without modification
Select an icon and enable the
available options
Select an icon and enable the
available options
17
Comments
Stopping the device:
Keep the ON / OFF button
depressed for 3 seconds to switch
off the display unit.
If necessary you can switch off the
sensor by pressing on the ON / OFF
button.
Remèdes
Switch off display unit, switch on
sensor, switch on display unit.
Bring appliances closer together.
Synchronise the display unit with
the sensor (see § 7.1).
Main Menu:
Select MENU.
Confirm with
Select the required sub-menu.
Confirm with
GB