Function (Peak Stress Save) - Tractel dynafor LLX1 Série Instructions D'emploi

6.2.4.5 Function (Peak stress save)

Display
5
6
"NOTE"
Action
Reset MAX value to current
stress level
ESC
Return to standard display
No action
No action
Reset MAX value to current
stress level
ESC
Return to standard display
Enable MAX window selection
mode
Enable MAX window selection
mode
Activation of the UNITS, TARE and MAX. functions is not passed
on from the display unit to the sensor and vice-versa.
Parameters configured using the display unit will only concern
the display unit. If these functions must also be activated on the
sensor, you must use the LLX1 keypad to access these.
15
Comments
Peak load function:
From the Standard screen, go to the
MAX icon.
Confirm with
The "in progress" screen appears
while the display unit goes to "Peak
load" mode.
Peak load function:
The peak load value is displayed.
The barograph represents 100% of
sensor capacity.
The cursor indicates the peak value
of stress.
The moving black line shows the
immediate stress value.
GB