Elementary Functions And Corresponding Displays; Standard Display; Navigating Between Icons; Measurement Unit Selection - Tractel dynafor LLX1 Série Instructions D'emploi

6.2.4 Elementary functions and corresponding displays

6.2.4.1 Standard display

Display
1

6.2.4.2 Navigating between icons

GB
2

6.2.4.3 Measurement unit selection

3

6.2.4.4 TARE Function

4
Action
No action
ESC
No action
Select an icon
Select an icon
Confirm current selection
ESC
Return to standard display
Move clockwise from icon to
icon
Move anti-clockwise from icon
to icon
Confirm selection
Return to standard display
ESC
without modification
Select an icon and enable the
available options
Select an icon and enable the
available options
Confirm TARE option when it
is highlighted.
Return to standard display
ESC
without modification
Select an icon and enable the
available options
Select an icon and enable the
available options
14
Comments
Standard Display:
Sensor stress.
Measurement units.
Display unit power pack level.
Sensor battery level.
Radio reception level.
Navigation:
By pressing on either of the two
arrows, all available functions are
displayed.
Move from icon to icon using the
arrows.
Select Unit: daN, kN, kg, t, Lbs,
Ton.
Select the unit icon, which starts
flashing.
Confirm with
Enable the various unit symbols.
Confirm with
TARE Function:
Select the TARE icon, which starts
flashing.
Confirm with
Enable the various options.
Confirm with
TARE = Initialise a new Tare
RAW = Sum of NET + TARE
NET = Difference between RAW - TARE