Service Time Menu; Date And Time - La Cimbali M39 Dosatron TE Utilisation Et Installation

Masquer les pouces Voir aussi pour M39 Dosatron TE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 68
Pressing the
key (29), the following message will appear
on the display:
SERVICE TIME

DATE AND TIME

ON time
OFF time
Day off
Energy Saving
- ON time
- OFF time
- day off
General indications
If there is no day off (i.e. the enterprise never closes),
enter "none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time 22:00
OFF time 22:00)
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
- Energy Saving (enable/disable the Energy Saving
- Night ON (start time for evening beverage price: only
- Night OFF (end time for evening beverage price: only
To modify the date and hour, press the
the corresponding line. The following message will appear:
DATE AND TIME
Year
Month
Date
Hour
Minutes

Service time menu

+
03:00
03:00
none
YES
Date and time
key (29) on
+
15
09 SEP
23 WED
17
12
19 EN
- Wash
Washing cycle can be performed at pre-set time. At the
set time, the display will show: this message "EXECUTE
COFFEE WASHING".
When requested, a washing cycle (simultaneous or
sequential) will be performed as described in the "Cleaning
Operations" paragraph.
Follow these steps to set the time for the washing cycle:
- Position the cursor on the line WASH
- Press the
key (29
- Change the time, using the
- Press the
Set OFF against the time so as to not activate these
wash cycles.OFF is displayed press the
indicated time is "00:00".
NOTES. The technical personnel has the ability to enable
or disable the "block" function.
With "block" enabled, if the washing cycle is not performed
within an hour, the machine prevents beverages from
being dispensed.
- Water Change water replacement can be set by time
The "Water Change" function with time request is set by
the technical personnel who can also enable or disable
the "block" function.
With "block" enabled, if the water change is not done
within an hour, the machine prevents beverages from
being dispensed.
With request scheduled the user can only change the
time the request appears.
Follow these steps to set the time:
- Position the cursor on the line Water Change
- Press the
key (29
- Change the time, using the
- Press the
Use the
(30) and
(31) keys to move the cursor (black
(29). The cursor will turn into an arrow è and it becomes
possible to change the number for the selected entry by
using the
(30) and
Once the operation is completed, press the
Note: the cursor changes back to black line.
Repeat the operation described above to modify
other parameters.
(30) and
(31
(31) key the
(30) and
(31
(31) keys.
key to
key

Publicité

Table des Matières
loading

Table des Matières