Re-Attaching The Refrigerator Doors; Disassemble The Freezer Drawer - Samsung RF23HTEDBSR Manuel D'utilisation

Masquer les pouces Voir aussi pour RF23HTEDBSR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts ( 9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16").
Remove the lower left and right door hinges
( 10 ).
(10)
(8)
(9)
Allen wrench
Allen wrench
DA68-02954B-00.indb 14
DA68-02954B-00.indb 14
RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confi rm that it holds the line fi rmly.
Type A
Type A
Center of Transparent
Center of Transparent
coupler
coupler
clip A (1/4")
clip A (1/4")
(6.35 mm)
(6.35 mm)
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper drawer by lifting it up.
2. Remove the freeze room guard ( 1 ) by lifting
the guard up.
English - 14
Type B
Type B
Dispenser
Dispenser
The Guide Lines
The Guide Lines
clip A (1/4")
clip A (1/4")
(6.35 mm)
(6.35 mm)
(1)
(1)
2014. 5. 20.
2014. 5. 20.
4:35
4:35

Publicité

Table des Matières
loading

Table des Matières