Maintenance & Care - Black & Decker Pfister Petaluma 531 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

15
Turn on hot and cold water supplies, and check for leaks above and below the sink.
16 FAUCET FUNCTION
FAUCET FUNCTIONS
16
HOT
OPEN
16A
COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise. The Spout (16A) can be rotated around the Faucet Body in
any direction.
Note: Flush faucet before turning on valve (see step 20).
17 PULL-OUT OPERATION
17
17A
The Spray Head (17A) can be pulled forward to spray water in any direction.
18 SPRAY OPERATION
ENGLISH
18
To activate the spray mode, simply press Toggle Button (18A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of
the Toggle Button (18A/18B) while the faucet is in operation.
Note: The faucet will always turn on in regular stream mode.
19 SOAP DISPENSER OPERATION
19
COLD
OPEN
To activate Soap Dispenser (19A), press Dispenser Head (19B) to spray liquid soap.
20 FLUSHING
20
To prevent damage to the internal parts of your faucet from debris that may have
collected in the water lines, it will be necessary to flush the faucet. Flushing requires
the removal of the Spray Head (20A). To remove the Spray Head (20A), hold metal
Hose Fitting (20B) and turn the Spray Head (20A) counterclockwise. Turn the Valve
Lever Handles (20C) to the full on position. Run water for one minute. Repeat in hot
and cold positions. Reassemble the Spray Head (20A) to the Pull-Out Hose (20D) by
turning Spray Head (20A) clockwise.
Caution: do not over tighten spray head and pull-out hose.
21 AERATOR CLEANING
5
19A
MAINTENANCE & CARE
20A
20C
20D
20B
18B
18A
19B
20C

Publicité

Table des Matières
loading

Table des Matières