LITELINE AutoGuard GMSCR150 Serie Mode D'emploi page 5

INSTALLATION TO MONITOR / TV
1. Connect the antenna to the receiver.
2. Before connecting the receiver and monitor/TV to the
mains power, connect the receiver to a monitor/TV
with AV cable (yellow for video and red for audio).
* Note: audio is not available for this item.
3. Connect the adapter to the receiver.
4. Power on the monitor/TV and select AV mode.
All manuals and user guides at all-guides.com
MODE CONTROL DEFAULT SETTING
OFF
ON
1 2
CHANNEL SETUP (1-4):
ON : Channel available
OFF : Channel disabled
CHANNEL-LOOPING SETUP:
L : Channel Looping available
M : Channel Looping disabled
L
M
3 4
(L = Auto Loop)
(M = Loop disabled/Manual Set)