JVC DLA-VS2100 Manuel D'instructions page 48

3
Adjustments and settings in the menu (continued)
[2-2] COMP.
Color Space
Y Pb/Cb Pr/Cr
RGB
[2-3] PC
Auto Alignment
Tracking
Phase
Picture Position
Horiz.
Vert.
[3] Installation
Lens Control
RS50 RS50 VS21
Pixel Adjust
Installation Style
Front
Ceiling Mount (F)
Rear
Ceiling Mount (R)
48
Operation
All manuals and user guides at all-guides.com
(*) It can be set when the COMP. terminal is selected.
It configures the input signal method of the component input terminal.
Settings: Y Pb/Cb Pr/Cr, RGB
It is set for the component video image input signal.
It is set for the RGB video image input signal.
(*) Setting can be done when selecting a PC terminal.
The picture position of Tracking and Phase are automatically adjusted.
Adjusts the size and display of the horizontal direction and display area of the video
images.
(Depending on the signal, there is normally no need to be adjusted.)
Adjusts the flickering and blur of the video images.
(Depending on the signal, there is normally no need to adjustment.)
Adjust the display of the picture position.
Adjusts the horiz. of the video image.
Adjusts the vertical position of the image.
To Sub-menu "[3-1] Lens Control"
To submenu "[3-2] Pixel Adjust"
Matching the state of the projector's projection, one can switch horizontal and vertical flip
/ forward switch.
Settings: Front, Ceiling Mount (Front), Rear, Ceiling Mount (RE)
Front upright projection mode.
Ceiling/front projection mode.
Rear upright projection mode.
Ceiling/ rear projection mode.
[Y Pb/Cb Pr/Cr]
[Front]