Extension Cords; Loading Tool - Desa PowerFast 34310 Guide D'utilisation

Extension Cords

!
CAUTION: Use only extension cords marked for outdoor use.
WARNING ICON G 001
Be sure to use the right size extension cord. If cord size is wrong, tool may be
damaged. Tool performance may also be affected.
Extension Cord Size Requirement
1 to 25 feet, use 16 AWG rated cord
26 to 50 feet, use 14 AWG rated cord
Inspect extension cord often. Replace cord if worn or damaged.

Loading Tool

!
WARNING: Never load tool while it is plugged in. Accidental
WARNING ICON G 001
discharge may occur. Before loading, move trigger lock to the OFF
position and unplug tool.
1. Move trigger lock to the OFF
position (see Figure 1) and
unplug tool.
2. Turn tool upside down.
3. Press in latch lock and slide
staple chamber cover back
until fully open (see Figures 2
and 3).
Figure 2
Latch
Lock
Trigger Lock In
Off Position
Figure 1
Figure 3
Staple
Chamber
Cover
Continued