Factory Settings - Asco ControlD Manuel D'installation

INSTALLATION
3.

FACTORY SETTINGS

The C is supplied in a Current Controller configuration as standard.
D
ontrol
AscoDigiCom files for the Current Controller configuration (standard), a simple Process Controller configuration and a
Cascaded Process Controller configuration are included on the supplied CD-ROM.
The following configurations and pinnings apply for the supplied AscoDigiCom files:
Open-loop control
Voltage supply +24V or +12V
Voltage supply GND
PE
Setpoint 0 - 10 V
Setpoint GND
Coil +
Coil 0V
Closed-loop control
Voltage supply +24V or +12V
Voltage suply GND
PE
Sensor supply +24V or +12V
Sensor input 0 - 10 V
Sensor supply GND
Setpoint 0 - 10 V
Setpoint GND
Solenoid valve coil +
Solenoid valve coil 0V
Cascade or double-loop process control
Voltage supply +24V or +12V
Voltage supply GND
PE
Sensor supply +24V/+12V
Sensor input 1* 0 - 10 V
Sensor supply 1* GND
Sensor supply (1-2) +24V or +12V
Sensor input 2** 0 - 10 V
Sensor supply 2** GND
Setpoint 0 - 10 V
Setpoint GND
Solenoid valve coil
Solenoid valve coil
* Slave loop sensor (1)
** Master loop sensor (2)
If you have any questions on the configuration or parameter settings of this product, please contact our Product Support
by email at product.support@emerson.com or phone (+49) 7237-996-676.
Pin 1
Pin 2
Pin 3
Pin 11
Pin 12
Pin 15
Pin 16
Pin 1
Pin 2
Pin 3
Pin 5
Pin 6
Pin 7
Pin 11
Pin 12
Pin 15
Pin 16
Pin 1
Pin 2
Pin 3
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 15
Pin 16
Control D offers 3 control modes
PWM* Signal
Setpoint
Control D offers 3 control modes
PWM* Signal
Open loop control
Setpoint
PWM*
Setpoint Proportional
Solenoid Valve
Signal
Open loop control
Closed loop control
PWM*
Setpoint Proportional
PWM* Solenoid Valve Proportional
Setpoint Signal
Solenoid Valve
Signal
Closed loop control
Double loop control
PWM* Proportional
Setpoint
PWM* Solenoid Valve
Set- Signal Proportional
Master Slave
point Solenoid Valve
Signal
Control D offers 3 control modes
Double loop control
PWM* Signal
Comparator *PWM: pulse-width modulated
PWM*
Set- Proportional
Setpoint
Master Slave
point Solenoid Valve
Signal
Open loop control
Comparator *PWM: pulse-width modulated
Setpoint PWM*
Proportional
Solenoid Valve
Signal
Closed loop control
Setpoint PWM* Proportional
Solenoid Valve
Signal
Double loop control
PWM*
Set- Proportional
Master Slave
point Solenoid Valve
Signal
Comparator *PWM: pulse-width modulated
DP-IM14152-7
GB
Process
Process
Process
Process
Process
Process
Process
Process
Process