Video Output - Samsung DVD-HR773 Mode D'emploi

system setup

Video Output

You can enjoy high quality image through RGB or Component video
connections. RGB video output is available connecting scart jack(AV1)
and component video output is available connecting component(Y, P
P ) jack. Only one of these signals can be selected at one time.
R
•
Component
•
RGB
In Component mode, you can set video output to Progressive or
Interlace.
When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.
Available Video Output Jack
Output jack
Component Output
(Y, P
AV1 Scart
Composite Video out

M
When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.
Component Output (Progressive Scan)
This function is available when video output is component. This setting
enables you to select progressive mode. To view 'Progressive scan
mode', fi rst connect the component cable. (See page 26) Be sure the
Component cables are connected properly.
•
Progressive
The message "Do you want to maintain progressive mode? Reverting
in 10 seconds." will be displayed. Select "Yes" to revert progressive
mode.
•
Interlace
The message "Do you want to maintain interlace mode? Reverting in
10 seconds." will be displayed. Select "Yes" to revert interlace mode.

M
When the HDMI cable (not supplied) is connected, this screen is not displayed.
44_ system setup
Setting mode
, P )
B R
R, G, B
Composite
,
B
Component mode
HDD & DVD RECORDER
HDD
TV Aspect : 16:9 Wide
Library
3D Noise Reduction : Off
Timer Record
Video Output : Component
Component
Disc Manager
Component Output : Interlace
RGB
Setup
BD Wise : Off
HDMI Resolution : 576P
m s r
MOVE SELECT RETURN
RGB Mode
HDD & DVD RECORDER
HDD
TV Aspect : 16:9 Wide
Library
3D Noise Reduction : Off
Timer Record
Video Output : Component
Disc Manager
Component Output : Interlace
Interlace
Setup
BD Wise : Off
Progressive
HDMI Resolution : 576P
m s r
MOVE SELECT RETURN
Video
|
|
|
|
|
|
e
EXIT
Video
|
|
|
|
|
|
e
EXIT