Manual Setup - Samsung DVD-HR773 Mode D'emploi

4. Press the ▲▼ buttons to select Auto Scanning, then press the OK or ► button.
The message "Your data will be lost. Press [OK] to continue, [RETURN] to exit." is displayed.
5. Press the OK button, then press the ▲▼◄► buttons to select your Country.
•
The HDD & DVD RECORDER searches for the stations according to a preset preference list
corresponding to the country that you have selected. (See page 34)
6. Press the OK button. Channel scan will be started.
•
The fi rst frequency band is scanned and the fi rst station found is displayed and stored. And the HDD &
DVD RECORDER searches for the second station and so on.
•
The number of stations automatically stored by the HDD & DVD RECORDER depends on the number
of stations that it has found.

M
Press the OK button to stop the Auto Scanning

Manual Setup

You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to
remove. You can programme the order of channels.
To setup, follow steps 1 to 3 in "Auto Setup" on page 36.
4. Press the ▲▼ buttons to select Manual Setup, then press the OK
or ► button.
5. Press the ▲▼ buttons to select a PR (programme) you wish to edit,
delete, or swap, then press the COLOUR button.
Select Edit, Delete or Swap.
•
In case of Edit (RED(A) button) : You can add or edit PR
(programme) information. After change PR informations (CH.,
Name, Decoder, MFT, System), select Save, then press the OK
button.
- CH : Tune the channel using ◄► buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name
by using ▲▼◄► buttons.
- Decoder : If you set on, you can record scrambled channels
using external decoder box.
Before setting on, refer to connecting external decoder
box in the page 24.
- MFT (Manual Frequency Tunning) : You can tune up the
channel frequency better using ◄► buttons.
- System : You can select broadcasting system of the receivable channel(B/G or L/L').
•
In case of Delete (GREEN(B) button) : the channel information of selected PR(programme) will be
removed.
•
In case of Swap (YELLOW(C) button) : You can swap the channel information of two PR(programme).
For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the OK button at PR5.
Manual Setup
PR CH Name Decoder System
01 002 - - - - Off L / L'
02 004 - - - - Off L / L'
03 - - - - - - - - - – / –
04 - - - - - - - - - – / –
05 - - - - - - - - - – / –
06 - - - - - - - - - – / –
07 - - - - - - - - - – / –
Edit Delete Swap
Manual Setup
PR 01
CH 002
Name - - - -
Decoder Off
MFT
System L / L'
Save
m s
MOVE SELECT
English _37