Getting Started - auna 10032166 Mode D'emploi

EN
54

GETTING STARTED

Packing Content
• Kitchen radio unit
• Mounting kit
• Power adaptor
• Audio cable with 3.5mm jack at both ends
• User manual
Mounting the set under a cabinet
1. Decide on the installation location and installing the unit based on the
best cabinet/shelf. Attached the metal bracket under the cabinet/shelf
with supplied mounting screws. If the board thickness of cabinet/shelf
is thinner than the screw's height, you can supply the suitable screw by
yourselves.
2. Slide the unit to metal bracket until it locks securely. Due to its heavy
weight, the unit should be installed with great care. Be sure that the
cabinet is used that is sturdy enough to support the weight of the unit.
To reduce the risk of fire, do not place any heating area or without the
spacer.
You can slide out the unit from the metal bracket to be the stand kitchen
radio. Then, you can slide the plastic clapboard in the unit.