Dell PowerVault 775N Manuel page 9

Broadcom NetXtreme Gigabit Ethernet Server
Adapter
When a Broadcom NetXtreme Gigabit Ethernet Server Adapter is installed and Wakeup
On LAN (WOL) is enabled, your system's connection speed is 10/100 Mbps. The
Broadcom NetXtreme Gigabit Server Adapter only supports 10/100-Mbps links when WOL
is enabled and the system is in Microsoft
hibernation.
When the operating system loads and the correct drivers are installed, your supported
connection speed is 10/100/1000 Mbps. It is recommended that when WOL support is
required, the Broadcom NetXtreme Gigabit Server Adapter is connected to a 10/100/1000
link partner in autonegotiation mode.
WOL is supported on only one Ethernet port in the system, which does not include the
system management port. If you are using an integrated NIC for this purpose, you must use
the NIC 1 connector. WOL is not supported on Broadcom NetXtreme Gigabit 5703
Ethernet adapters.
You can find more information about Hyper-Threading Technology at developer.intel.com.
Console Redirection Special Key Functions
Table 1-1 lists additional ANSI escape sequences that represent a special key or function.
For additional information on console redirection and configuring special key functions, see
"Console Redirection" in your User's Guide.
NOTE: ANSI escape-sequence key combinations listed in Table 1-1 are case-sensitive.
For example, to generate the character <Insert> you must press <Esc> and then
press <Shift><+>.
Ta b l e 1 - 1 . A d d i t i o n a l A N S I E s c a p e S e q u e n c e s
Key(s)
<Home>
<End>
<Insert>
<Delete>
<Page Up>
<Page Down>
<Shift><Tab>
®
Windows
Supported Sequence
<Esc><h>
<Esc><k>
<Esc><Shift><+>
<Esc><->
<Esc><Shift><?>
<Esc></>
<Esc><[><Shift><z>
®
2000 Server and Advanced Server
Terminal Emulation
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
Infor m ation Update
1-5