Water Supply; To Reduce A Risk Of Leaks - Dacor DDW24M99 Serie Consignes D'installation

Installation

Water supply

• The hot water supply line must support
water pressures between 20 psi and
120 psi (140-830 kPa).
• Water temperatures must be between
120 °F (49 °C)and 149 °F (65 °C).

To reduce a risk of leaks:

• Make sure water taps are easily
accessible.
• Turn the water tap off when the
dishwasher is not in use.
• Check for any leaks at the water hose
fittings on a regular basis.
8 English
DACOR_DW9500M_DD68-00197A-01_EN.indd 8
Flooring
For safety, the dishwasher must be
installed on a solidly constructed floor.
Wooden floors may need to be reinforced
to minimize vibrations. Avoid installing
on carpet or soft tile. Carpeting and soft
tile may cause vibrations and may cause
your dishwasher to move slightly while
operating.
WARNING
Do not install the dishwasher on a poorly
supported structure.
2017-08-23 8:54:52