Dacor DDW24M99 Serie Consignes D'installation page 28

Installation
Water leakage sensor
Kick plate (BU model only)
If you want to install the kickplate, follow these instructions.
Small
Big
28 English
DACOR_DW9500M_DD68-00197A-01_EN.indd 28
3. Once the leak is stopped, lay down
the dishwasher as shown, and wipe
out moisture from the water leakage
sensor.
4. Plug in the dishwasher. Then, open the
water valve and start a cycle.
5. If the LC information code continues to
appear, contact a local Dacor service
center.
1. Turn the front legs of the dishwasher to
adjust the height so that the kick plate
fits in.
NOTE
• For dishwasher models without the
adjustable legs, turn the kick plate
upside down so that the kick plate fits
in.
• Dishwashers whose height is under 34"
(864 mm) do not support installation of
the kick plate. Use the furniture plate
instead.
2017-08-23 8:54:58