Dacor DDW24M99 Serie Consignes D'installation page 22

Installation
22 English
DACOR_DW9500M_DD68-00197A-01_EN.indd 22
Ø 2
4. If the installation brackets on the front
of the dishwasher are too long cut them
down using a pliers.
5. Carefully drill 2 screw holes into the
bottom of the countertop from beneath,
one for each countertop bracket.
• Make sure the hole you drill is smaller
than the diameter of the screw.
6. Insert the provided screws into the hole
of brackets, and then tighten to secure
the dishwasher to the countertop.
NOTE
Use a magnetic screwdriver to help
prevent screws from falling into the
dishwasher.
7. Insert the provided screws into the
brackets, and then tighten to secure the
dishwasher to the countertop.
NOTE
• If the provided brackets are too long,
cut them down using pliers.
• Use a magnetic screwdriver to help
prevent screws from falling into the
dishwasher.
8. Connect the water hose, but do not
open the water tap until installation is
complete.
2017-08-23 8:54:56