Lumilight Led - Zephyr Tornado Mini AK8400BS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
Installing Aluminum Mesh Filters (FIG. G):
1. Place back of filter into channel on left side of
Power Pack.
2. Pull filter handle towards left side of Power
Pack.
3. Pivot filter up and lock into place.
Replacing Aluminum Mesh Filters
Hood Model
AK8400BS
AK8400BS290
To order parts, visit us online at http://store.zephyronline.com.

LumiLight LED

In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. H):
1. Remove aluminum mesh filter.
2. Remove bottom panel by two screws.
3. Disconnect LED light quick connector.
4. Push in the two side clips on the ends of the
LED light.
5. Push LED light through the light panel opening.
Tornado Mini Use, Care, and Installation Guide
Part Number
50200054
50200054
Maintenance
1
2
FIG. G
Qty. to Order
1
1
Push the clip
FIG. H
3
17