Maintenance Intervals - Haussmann FSA-LG-01 Manuel De L'utilisateur

MAINTENANCE INSTRUCTIONS
Drive Shaft (C1,C2)
1. Loosen clamping knob (5).
2. Disconnect the sweeper attachment shaft (1)
from power head shaft (8).
3. Remove lower flex cable(D), wipe clean and
apply a thin coating of 15 ml (1/2 oz.) of high
temperature automotive grease.
4. Carefully insert flex cable (D) back in the
aluminum tube.
5. Joining the sweeper attachment shaft to the
power head shaft, and tighten the knob (5)
securely.
C1
SKILL LEVEL
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = Experience required. Specialized tools are required.

MAINTENANCE INTERVALS

Component/
System
Drive shaft
Gear Housing Grease
Brushes
EN
Screws/Nuts/
Bolts
I= Inspect, R = Replace
28
All manuals and user guides at all-guides.com
C2
Maintenance Before
Procedure Use
Grease
InspectTighten// I,R
Replace
Inspect Tighten// I
Replace
WARNING
You may make adjustments and repairs
described in the maintenance section. For other
repairs, have the unit serviced by an authorized
servicing dealer.
ATTACHING THE STORAGE HANGER (C3,C4)
place the hanger cap over the attachment shaft.
Slightly rotate the cap from side to side until the
button locks into place.
C3
Every Daily or 25
Refuel Every Hrs.
4 Hrs.
(1)
C4
Yearly *Date
Maintenance
Performed
I**