Operating Instructions - Haussmann FSA-LG-01 Manuel De L'utilisateur

All manuals and user guides at all-guides.com

OPERATING INSTRUCTIONS

OPERATION
PRE-OPERATION CHECK
ENGINE OIL LEVEL
Be sure to check the engine on a level
surface with the engine stopped.
1. Check the oil level on a level surface.
(Picture 1)
(Picture 1)
2. Ensure the engine is filled with oil before
using the rotating floor sweeper (Picture 2)
(Picture 2)
You must fill the engine with oil before
using the rotating floor sweeper for the first time
Ensure oil level is between the min and
max markings on the dipstick before each use of
the rotating floor sweeper. (Picture 3)
Lower level
mark (empty
Upper level
mark (full)
(Picture 3)
Fuel level -- Pay attention to the fuel level and
ensure that it is kept above the minimum mark
on the fuel tank while using the rotating floor
sweeper (Picture 4)
(Picture 4)
Keep attention to the Fuel level, be sure
that the Fuel Level should be always between
Upper level And Lower level when working.
Never use an oil / gasoline mixture or dirty
gasoline.
AIR FILTER
-- Check for dirt in the air filter.
--If the air filter is dirty, clean it with the
following steps: (picture 5,6)
1) Remove the air filter cover
2) Remove the air filter(the foam)
3) Wash the air filter using water and detergent.
Allow the filter to dry completely before re-
installing it into the air filter housing.
4) Re-assemble it in reverse order
RETIGHTENING BOLTS AND NUTS
Check for loose bolts and nuts. Tighten them if
necessary.
necessary.
(Picture 5)
Wash
Kerosene
Soak
Squeeze Engine oil
(Picture 6)
EN
23