JVC D-ILA DLA-HD1 Manuel D'instructions page 31

Setup>Profile Memory
L
Profile Memory
Registers or deletes image profiles.
Save User1
Save User2
Save User3
Clear User1
Clear User2
Clear User3
Reset Cinema
Reset Natural
Reset Dynamic
AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage
ProfileB.
Setup>Picture Position
M
Picture Position
Adjusts the horizontal/vertical position of the projected image.
The display position value varies with the input signal.
This adjustment is available only for analog input signals.
Setup>HDMI Input Level
N
HDMI Input Level
Configures the input level setting of the HDMI input terminal.
Standard
Enhanced
This setting is available only when projecting the HDMI input.
Setup>Mask
O
Mask
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
Masking is available only when high definition images are input.
Video>COMP
P
COMP
Configures the input signals of the component video input terminals.
Y Pb/Cb Pr/Cr
RGB
SCART
This setting is available only when projecting the component video input.
Registers image profile in AUser1B.
Registers image profile in AUser2B.
Registers image profile in AUser3B.
Returns image profile in AUser1B to factory setting (natural).
Returns image profile in AUser2B to factory setting (natural).
Returns image profile in AUser3B to factory setting (natural).
Returns image profile in ACinemaB to factory setting.
Returns image profile in ANaturalB to factory setting.
Returns image profile in ADynamicB to factory setting.
For normal circumstances, select this setting.
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Masks 2.5 % of the screen.
Masks 5 % of the screen.
No masking.
Select this when component video signals are input.
Select this when RGB video signals are input.
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
ENGLISH
31