Valor G4 Guide D'installation

INSTALLATION MANUAL
784EC Edgemont Craftsman Front Kit
with Backing Plates 799BPB-1, 799BPB-2 or 799BPB-3 (sold separately)
Use with Valor G4 780 and 785 models ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 784ECF Edgemont Craftsman Front Kit is intended to be used on Valor
heater model 780 & 785 with a required choice of Backing Plate 799BPB-1,
799BPB-2 or 799BPB-3.
Mounting of the 784 affects cavity dimensions—see below and installation
manual supplied with the heater for more information.
4007858-02
©2020, Miles Industries Ltd.
G4
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
½
¾
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier. These
instructions are to be used
in conjunction with the main
installation instructions
for the above listed heater
model.
Cavity Depth
¾
with fan
¾
Overview (G4 and 799BPB sold separately)
G4 engine
799BPB
Backing Plate
784EC front
including doors