Fichet-Bauche COFFRE-FORT Mode D'emploi page 22

- Set the chosen digit or number (0 to 19) on each
counter by turning them clockwise and counting each
click (for example 6-2-9).
- Inside the door, turn the change butto
anticlockwise until it reaches the stop (a half-
revolution) using the change key supplied with the
product.
SCRAMBLING THE COMBINATION
- Turn the 3 counters either clockwise or
anticlockwise at random.
The combination is set. Keeping the door
open, check the setting of the lock.
CHECKING THE SETTING (door open - bolt engaged)
- Turn the 3 counters anticlockwise until they reach the stop.
- Set the chosen and pre-set combination by counting the clicks (turn
clockwise).
- Insert the key into the M3b lock and turn it clockwise:
1) The key turns: the setting is correct. Withdraw the bolts. You can
close the door.
2) The key does not turn: you have not dialled the
pre-set combination. Inside the door, check the 3
openings next to the change button: a red spot
should be visible in each opening. Outside the door,
turn the counter(s) until the red spot(s) appear.
Reset the combination.
TIP : Each time you change the combination, it is advisable to check it
2 or 3 times (with the door open).
CLOSING THE SAFE
☞ Before closing, put the instructions away outside the safe.
- Close the door to the safe.
- Turn the key anticlockwise until you reach the stop.
- Remove the key.
- Scramble the combination
Note : If the lock is not fully closed, the key cannot be removed
(reminder function).
62
FR
9
EN
ES
DE
IT
PT
NL