Mpx Key Lock + 3 Counter Combination - Fichet-Bauche COFFRE-FORT Mode D'emploi

MPX KEY LOCK + 3 COUNTER COMBINATION

IMPORTANT
The keys to your safe are unique. To make the high-security Mpx lock work properly,
the keys were machined to a high degree of precision.
To keep in good condition, we recommend you handle them carefully and
systematically protect them in a key case.
In the event of the loss, wearing down or damage of one of the keys, you must contact
our After Sales Service at once to have the lock or key replaced, thereby preventing
the failure of the safe.
OPENING THE SAFE
- Locate the sealed plastic box containing the keys.
- Check that the box is sealed. This guarantees that your keys are confidential.
- Open the box.
- Check that the number of keys corresponds to the number of keys that appears on
the delivery note.
- Insert the key into the keyhole. You must feel the mobile parts of the lock come into
contact with the key.
- Turn the key clockwise until you reach the stop.
- Pull towards you on the key to open the door.
IMPORTAN T: The following steps must be carried out WITH THE DOOR
OPEN AND THE BOLT ENGAGED.
SETTING THE COMBINATION (door open - bolt engaged)
- Lock the Mpx lock by turning the key anticlockwise ;
remove the key from the Mpx lock.
- Inside the door, turn the change button clockwise untilit
reaches the stop (a half-revolution) using the change key
supplied with the product.
- Insert the key successively into each of the three
counters and turn it anticlockwise until it reaches the stop.