Panasonic CQ-RG131U Manuel D'instructions page 24

Installation Guide
E
N
G
L
To Remove the Unit
I
S
H
a) Remove the trim plate with a screwdriver as shown in the figure (Fig. 1).
15
b) Pull out the unit while pushing the two lock levers using Dismounting Plate
(Fig 2, 3)
c) Remove the unit pulling with both hands. (Fig 4).
Fig. 2
Note: Do not lose the Dismounting Plate. It will be needed to remove the unit from the car's
dashboard.
24
Fig. 4
a
CQ-RG131U
continued
Trim Plate
Lock Lever
Lock Lever
a
Dismounting Plate
Screwdriver
Fig. 1
as follows.
Fig. 3