Leuze electronic DDLS 500 Mode D'emploi page 14

EN
Safety
This optical data transmission system was developed, manufactured and tested in
line with the applicable safety standards. It corresponds to the state of the art.
Intended use
Devices of the DDLS 500 series have been designed and developed for the optical
transmission of data in the infrared range.
Areas of application
Devices of the DDLS 500 series are designed for the following areas of application:
- Data transmission between stationary and/or moving devices. The devices
must – with respect to the transmission beam spread - be positioned oppo-
site one another without interruption. A data transmission path consists of
two devices designated with "Frequency F1" and "Frequency F2" or two
devices that are both designated with "Frequency F0" on the name plate.
CAUTION
Observe intended use!
 Only operate the device in accordance with its intended use.
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by
improper use.
 Download the technical description from www.leuze.com
 Read the technical description before commissioning the device.
Knowledge of this technical description is an element of proper use.
NOTICE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
14