Setting Mode - Samsung DW80M9 Serie Manuel D'utilisation

Using the Toggle keys
• Press the Lower + Hi-Temp Wash
button for 3 seconds to enable or disable
Auto Release™ Dry.
*
More About Auto Release Dry
*
*
Changing the "Auto Release™ Dry" setting can infl uence drying results. Select "A1" mode
for better drying results. ("A1" is the default setting.)
After a cycle is complete, the door automatically opens to let steam out. This is normal and
not a product malfunction.

Setting Mode

The Setting Mode lets you change the dishwasher's sound setting and LED brightness setting.
To enter the Setting mode, press the Delay Start + Sanitize buttons for 3 seconds while the
dishwasher is on. Press the Sanitize button to select a sub-setting menu, and then press the
Delay Start button to change a setting.
-
-
When using the dishwasher, try to arrange the dishes properly as described on page 20.
WARNING
• You should remove food remains such as bones, fruit seeds, etc. and any other waste such
as toothpicks, paper, etc. from the dishes as these may cause damage to the dishes, create
noise, or cause the dishwasher to malfunction.
• Select the appropriate cycle depending on the level of soil and the type of dishes.
• Use only the proper amount of detergent and rinsing agent.
Do not wash the following items in your dishwasher.
WARNING
• Acrylic or Aluminum items: Acrylic and aluminum items can discolor dishes with printed
gold rim decoration and mar other items.
• Dishes treated with adhesive: Treated plastics can come apart. Wood, ivory, copper, and
tin glued to dishes can come loose.
• Plastics with a temperature tolerance less than 194 ˚F (90 ˚C): Thin plastics wash and dry
poorly, and may be damaged by elevated wash temperatures.
• Tin: Tin should be washed by hand and dried immediately as it can rust.
• Wooden utensils: Wooden items can crack.
DW9900M-00184B-00_EN.indd 15 DW9900M-00184B-00_EN.indd 15
"A0" disables Auto Release™ Dry.
"A1" activates Auto Release™ Dry.
Once the door opens in the
Auto Release™ Dry mode, the door
cannot be closed manually for the next
2 minutes.
The Auto Release™ Dry mode will be
disabled for the Rinse Only cycle.
Sound Setting: Press the Sanitize button until "U1" or " U0" is displayed. To change the
setting, press the Delay Start button. "U0" means that the sound is off for all cycles. The
dishwasher maintains the Sound Setting you have selected until you change it.
Pocket LED Brightness Setting: Press the Sanitize button until "B0-B5" is displayed.
The higher the number, the brighter the LEDs. To change the setting on the dishwasher,
press the Delay Start button.
English - 15
2016-12-12 2016-12-12 2:51:41 2:51:41