Touch Controls; Setting Mode - Samsung DW80K7050 Serie Mode D'emploi

using your dishwasher

Touch controls

Touch controls allow you to operate the dishwasher easily.
• They are convenient to operate, requiring only a soft touch.
• Have a simple and stylish design.
• Are easy to clean.
If you have children or you want to clean the Control Interface, we recommend activating
the Control Lock feature to lock the control buttons. See page 8.
- Children will not be able to accidently start the dishwasher by touching the controls with
this option selected.
- If a cycle is running, the buttons will not respond. (except the Power button)
- If dishwasher is off, only the Power button responds.
Auto Release
TM
Auto Release is designed to improve the drying performance , which opens the door (5 to
15 minutes before a cycle is complete)in between 15 seconds and 3 minutes after the actuating
signal is triggered, You can change the default settings as follows:
Auto Release
Using Setting Mode
• To enter Setting mode, press the Delay Start+Sanitize button for 3 seconds while the
dishwasher is on.
•
Press the Sanitize button until"A1" or "A0" is displayed,"A0" disables Auto
TM
Release Dry. "A1" enables Auto Release
•
Press the Delay Start button implement your choice .
Using Toggle keys
Press the Lower+Hi-Temp Wash
•
button for 3 seconds to enable or disable
TM
Auto Release Dry.
"A0"disables Auto Release Dry.
•
"A1"activates Auto Release Dry .
• Once the door opens in the
Auto Release Dry mode, the door
cannot be closed manually for the next 2
minutes.
The Auto Release Dry mode will be
•
disabled for the Rinse Only cyvle.
Changing the "AutoRelease™ Dry" setting can infl uence drying results. Select "A1" mode
for better drying results. ("A1" is the default setting.)
After a cycle is complete, the door automatically opens to let steam out. This is normal and
not a product malfunction.

Setting Mode

The Setting Mode lets you change the dishwasher's Sound, Light indicator , and AutoRelease™
Dry settings. To enter the Setting mode, press the Delay Start + Sanitize buttons for 3
seconds while the dishwasher is on. Press the Sanitize button to select a sub-setting menu and
then press the Delay Start button to change a setting.
DW7000KM-02025B-01_EN.indd Sec4:12 DW7000KM-02025B-02_EN.indd Sec4:12
TM
TM
On/Off
TM
TM
TM
TM
English - 12
TM
Dry. Select "A1" for better drying results.
2017-01-03 2016-05-18 10:47:24 10:47:24