Safety Instructions; General Safety - Dometic TankMate DTM05C Instructions De Montage Et De Service

All manuals and user guides at all-guides.com
TankMate DTM05C
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
z Damage to the product resulting from mechanical influences and excess
voltage
z Alterations to the product without express permission from the manu-
facturer
z Use for purposes other than those described in the operating manual
2.1

General safety

!
WARNING!
z Do not operate the device if it is visibly damaged.
z This device may only be repaired by qualified personnel. Inade-
quate repairs may cause serious hazards.
z If the power cable of this device is damaged, it must be replaced
by the manufacturer, customer service or a similarly qualified
person in order to prevent safety hazards.
z When laying the cables, make sure:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection.
z Attach the cables securely to prevent tripping hazards. This can
be performed by using cable binders, insulating tape or gluing
in place with adhesives.
EN
Safety instructions
23