Safety Instructions For Spray Guns - dynatec PSG 45 Mode D'emploi

PSG 45
e) Take proper care of your tools. Check whether the moving parts function
trouble-free and do not jam, whether parts are broken or damaged so that
the tool function is impaired. Have damaged parts repaired before using the
tool. Many accidents have their origin in power tools that have been maintained badly.
f) Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. Take the working
conditions and the activity to be carried out into consideration. The use of power
tools for purposes other than the intended ones can lead to dangerous situations.
g) Keep the handles and grip surfaces dry, clean and free of oil and grease. Slippery
handles and grip surfaces hamper safe operation and control of the electric tool in
unforeseen situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.

Safety Instructions for Spray Guns

Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
•
The spray guns may not be used in workplaces covered by the explosion-protection
regulations.
•
A good natural or artificial ventilation has to be ensured in order to avoid the risk of
explosion during spray work.
•
During spraying there must be no sources of ignition such as, for example, open fires,
lit cigarettes, sparks, glowing wires, hot surfaces, etc. in the vicinity.
•
Before working on the spray gun remove the power plug from the socket.
•
Do not use the spray guns to spray flammable substances.
•
The spray guns may not be cleaned with flammable solvents.
•
Take into account the dangers that can arise from the sprayed substance and observe
the text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any substances whose hazard potential is not known.
•
Wear breath protection equipment as well as ear protection.
GB
11