Filter Saturation Alarm; Alarm Messages; Hood To Hob Connection - Franke FS DW 866 XS Manuel D'utilisation

EN

Filter saturation alarm

The alarm for cleaning the grease filter turns on after
100 hours of effective running time of the hood.
The icon of the key
switched off.
Resetting the alarm „filter saturation"
The reset has to be performed while the ventilation
of the hood is switched off.
Press to switch the ventilation off.
X X
Press and hold
X X
All icons blink 3x. The alarm is reset.

Alarm messages

Alarm „Grease filter saturation"
When alarm occurs you have to clean the grease
filter.
Clean the grease filter.
X X
All manuals and user guides at all-guides.com
is blinking, when the hood is
for 2 seconds.
FS DW 866 XS

Hood to hob connection

Some models of this hood can be paired with
specific hobs to establish a hood-hob-connection.
When using for the first time, it may be neccessary
to establish the pairing of the hood with the hob.
Pairing of hood and hob
Switch-on a new hood and a new hob within 1
X X
minute one each other.
The pairing procedure starts automatically.
„ „
During pairing procedure hood will „beep"
„ „
periodically.
After few minutes beeping pairing is completed
„ „
and the hood beeps with a specific sequence.
The hood and the hob are now able to re-connect to
their known partner each time they are switched on/
off.
Un-pairing of hood and hob
To un-pair hob or hood, repeat the following
sequence for each appliance:
5 sec. switch-on, 5 sec. switch off for 5 times.
X X
This procedure could be done for the hood and the
hob individually or for both devices.
After un-pairing the hood will restart beeping
„ „
waiting for a hob to reconnect.
The pairing will not restart until hob and hood are
switched off.
– 8 –