Thinkkitchen PRECISION Mode D'emploi page 18

Iced tea
1. Follow direction for "Heating Water".
2. Once desired temperature appears in LCD display, open lid and care-
fully add tea leaves or tea bags to the tea infuser. NOTE: We recom-
mend increasing the amount of tea leaves or tea bags used to allow
for a more robust iced tea.
3. Allow tea to steep for the recommended amount of time according to
the type of tea you desire.
4. Turn unit OFF by pressing the ON/OFF button. Allow unit to cool for
a minimum of 10 minutes and very carefully remove the tea infuser.
WARNING: Tea infuser will be hot. Be careful of hot steam.
5. Add ice and/or cold water up to the MAX fill line of the glass and close
the kettle lid for serving. Transfer tea to a serving pitcher to store in
refrigerator.
Heating water without steeping tea
1. Remove tea infuser and add water to the kettle max fill for water is
1.7 Liters.
2. Securely close lid and press ON/OFF button to begin heating water. Red
indicator light will turn on and water will begin to heat. NOTE: If no tem-
perature is selected kettle will be automatically set to max heat (212º F).
3. When water reaches a full boil (212º F) unit will beep 3 times and the
LCD display will show "OFF". NOTE: Keep Warm feature only acti-
vates when a specific programmed temperature has been set.
Memory feature
The unit features an internal memory that lets you remove the kettle
from the base for up to 5 minutes without the unit shutting off. Instead,
heating or Keep Warm will be paused. LCD will display "ER" while the
kettle is off the base. When the kettle is returned to the base the cycle
will resume from where it left off.
All manuals and user guides at all-guides.com