Thinkkitchen PRECISION Mode D'emploi page 17

OPERATING INSTRUCTIONS - MAKING TEA
Set up
1. Remove tea infuser from kettle by grasping the tea infuser handle and
lifting up.
2. Add fresh, cold water to the kettle, filling it for the number of cups of
tea you wish to make—up to 4 cups (max fill for tea is 1 Liter).
3. Insert tea infuser into the kettle and ensure it is securely in place.
Heating water
1. Make sure the kettle is securely on the base. Turn unit on by pressing
the ON/OFF button. Red indicator light will turn on. The kettle will beep.
2. Press PROG button, blue indicator light will turn. Then press TEMP
buttons and select temperature for the type of tea you are steeping.
3. Once the LCD display stops flashing the selected temperature has
been set. NOTE: The water will automatically maintain the selected
temperature for 60 minutes or until the kettle is turned off.
4. To adjust the temperature setting simply press the PROG button and
reset to desired temperature.
Steeping tea
1. Once desired temperature appears in LCD display, open lid and care-
fully add tea leaves or tea bags to the tea infuser. Securely close the lid.
2. Allow tea to steep for the recommended amount of time according to
the type of tea you desire.
3. Once tea has finished steeping lift the kettle off the base to serve.
NOTE: When kettle is off base, unit will beep and the LCD display will
show "ER" indicating the unit is paused.
4. When kettle is returned to base, the Keep Warm cycle will pick up
right where it left off. NOTE: To turn the unit off at any time, press the
ON/OFF button. Last selected temperature setting will remain in the
unit's memory until the unit is unplugged.
All manuals and user guides at all-guides.com