Atlantis Land I-See P 17 Serie Mode D'emploi page 18

No Plug & Play
Picture is fuzzy
Picture bounces or a
wave pattern is present
in the picture
The power LED is
ON(Red) but there's no
video or no picture.
Missing one of the
primary
colors(RED,GREEN,or
BLUE)
Screen image is not
centered or sized
properly.
Picture has color
defects (white does not
look white)
Power Cord should be connected
Check if the PC system is Plug & Play
compatible
Check if the Video Card is Plug & Play
compatible
Check if the D-15 plug pin of Video
Cable is bent
Adjust the Contrast and Brightness
Controls.
Move electrical devices that may cause
electrical interference.
Computer Power Switch should be in the
ON position.
Computer Video Card should be snugly
seated in its slot
Make sure monitor's video cable is properly
connected to the computer.
Inspect monitor's video cable and rnake
sure none of the pins are bent.
Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS LOCK
LED. The LED should either turn ON or
OFF after hitting the CAPS LOCK key.
Inspect the monitor's video cable and make
sure that none of the pins are bent.
Adjust pixel frequency(CLOCK) and
PHASE or press hot-key (AUTO)
Adjust RGB color or select color
temperature
A05-17XM-L0X_MX01
13