Trouble-Shooting - Atlantis Land I-See P 17 Serie Mode D'emploi

2.1 Auto color: Adjust the color automatically.
2.2 Exit
3. IMAGE (In the state of DVI without this item)
3.1 Auto configuration: Adjust the image position automatically
3.2 Clock: Adjust the image clock.
3.3 Phase: Adjust the image focus
3.4 H-Position: Adjust the image horizontal position
3.5 V-Position: Adjust the image vertical position.
3.6 Exit
4. TOOLS
4.1 OSD Timeout: Control the quit time of quit the OSD menu
automatically.
4.2 OSD H-Position: Adjust the horizontal position of OSD menu.
4.3 OSD V.-Position: Adjust the vertical position of OSD menu.
4.4 Volume(with the function of audio frequency): Adjust the volume
of the speaker.
4.5 Factory reset: Recall to factory setting
4.6 Exit
5. COLOR TEMP: selection 5000k warm, 6500k standard, 9300k
cool. If 5000k,6500k,9300k can't meet your need, you can use USER-
DEFINED menu to adjust the red , green and blue to gain the color
which you like.
6. LANGUAGE: Choose the language of OSD menu, you can choose
English 、Czech、Russia、German、Polish etc.
7. ANALOG/DIGITAL (with the function of DVI): Select the right input.
8. EXIT: Exit OSD menu.

4.0 Trouble-Shooting

Problem & Question
Power LED is not on
Possible Solution
Check if the Power Switch is in the ON
position
A05-17XM-L0X_MX01
12